Hybrid Digital Screwdrivers

Detailed Description

  • Digital torque set and save 8 memories
  • Long endurance, less noise and heat, and lightweight screwdriver
  • Selectable high speed up to 1,800 rpm
  • High efficient BLDC motor made by Maxon, Swiss
  • Economic cost against the compatible digital torque control screwdriver
  • Monitoring fastening quality and count of screw numbers
  • Error information by code display
  • Programing and monitoring PC software
  • Maintenance information and history memory
Category:

Description

Series Features

  • Swiss made BLDC motor used
  • ESD free by body grounding
  • Torque repeatability 3%
  • Long life time over 5 million cycle
  • Inside memory chip for tool data
  • Automation system applicablery

Screwdriver

Specification

Model Torque
(kgf.cm)
Speed
(rpm)
Bit Type Weight
(kg)
Rated
Voltage
Controller
HD150 5.5 ~ 15.5 500 ~ 1,700 A / B 0.44 40 VDC HDC-40i
HD220 7 ~ 22 400 ~ 1,250 A / B 0.44
HD350 10 ~ 35 400 ~ 740 A / B 0.51
HD450 10 ~ 45 300 ~ 600 A / B 0.51
HD35N 12 ~ 35 500 ~ 1,500 A / B 0.7 35 VDC HDC-35i
HD50N 15 ~ 50 300 ~ 1,050 A / B 0.7
HD100N 30 ~ 100 250 ~ 500 A 0.75
Model Torque
(kgf.cm)
Speed
(rpm)
Bit Type Weight
(kg)
Rated
Voltage
Controller
HD150P 5.5 ~ 15.5 500 ~ 1,700 A / B 0.44 40 VDC HDC-40i
HD220P 7 ~ 22 400 ~ 1,250 A / B 0.44
HD350P 10 ~ 35 400 ~ 740 A / B 0.51
HD450P 10 ~ 45 300 ~ 600 A / B 0.51
HD35NP 12 ~ 35 500 ~ 1,500 A / B 0.7 35 VDC HDC-35i
HD50NP 15 ~ 50 300 ~ 1,050 A / B 0.7
Model Torque
(kgf.cm)
Speed
(rpm)
Bit Type Weight
(kg)
Rated
Voltage
Controller
HDA150 5.5 ~ 15.5 500 ~ 1,700 A / B 40 VDC HDC-40i
HDA220 7 ~ 22 400 ~ 1,250 A / B
HDA350 10 ~ 45 400 ~ 740 A / B
HDA450 10 ~ 45 300 ~ 600 A / B
Model Torque
(kgf.cm)
Speed
(rpm)
Bit Type Weight
(kg)
Rated
Voltage
Controller
PHD35N 12 ~ 35 500 ~ 1,500 A / B 0.82 35 VDC HDC-35i
PHD50N 15 ~ 50 300 ~ 1,050 A / B 0.82
PHD100N 30 ~ 100 250 ~ 500 A 0.86

Bit Socket

Dimension

Controller

Specification

No Item Spec
1 Model HDC-40i HDC-35i
2 Input Electric AC 110V or AC 220V, 50~60Hz
3 Air pressure Min 4.5 bar / max 6.5 bar
4 Output Electric DC40V, 3A DC35V, 4A
5 Fuse AC250V, 10A AC250V, 15A
6 Dimension / Weight refer to the drawing
7 Preset Parameters Torque, Speed & Angle in 8 preset numbers
8 Selecting the preset no. 1) Front panel button
2) 25P I/O interface
3) 8 direct sensor connecting port
4) F1 button on the driver
9 Torque Calibration From -20% to +20%
10 Auto detection
of the connected driver
Auto detection of the offset value from the EEP-rom on the driver
11 Error Display Error display by code no. in system, communication & pattern error group
12 Fastening qulity control OK/NG monitoing of screw fastening by preset pattern of angles, times
13 Screw Counter Save the total screw number and monitoring the number of OK fastening screws.
14 Monitoring and Parameter Monitoring and parameter setting on the PC program(Ms Windows base).
15 Communication port USB or RS232C

Dimension

PC communication software, Hi-Manager

With free PC communication software, Hi-Manager, it is easy to set the parameters including torque, speed, fastening monitoring and quality control. For changing parameters of controller by PC software, it require Log-in password. For the manager Log-in password of Hi-Manager software, please contact to the distributor or service center. The password can not be open to operators without agreement of managing group. Hi-Manager without Log-in is available by request, too.

Parameter setting on Hi-Manager

1) Fastening Setting
2) Controller Setting
3) Screw Count Setting
4) Multi Sequence Setting
5) Driver ++ setting
6) Model selecting

Monitoring on Hi-Manager

1) Screw Count Monitoring
2) Real Time Data Monitoring

Produt Component

Standard Item

Option Accessories

Reviews

There are no reviews yet.

Be the first to review “Hybrid Digital Screwdrivers”

Your email address will not be published. Required fields are marked *